Elnur Direct Water Cylinders

The Elnur Gabarron direct model is supplied with two immersions for off-peak and on-peak use (except 90 litre model which only has an on-peak immersion). Therefore, the store of water in the cylinder can be heated utilising the off-peak electricity, making the unit extremely efficient.

Why choose the Elnur ASLNORELND unvented direct water cylinders?

• Supplied with two immersions for off-peak and on-peak use (except 90 litre model which only has an on-peak immersion)
• The cylinders are ultimately lightweight and an easy-to-install answer for electric hot water options.
• Latest HCFC free Environfoam insulation, with an ozone deletion potential of zero.
• Easy installation with all tappings within a 90° segment.
• All models have a temperature and pressure relief valve factory set at 6 bar and 92-95°C.
• The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water.
• The coils corrugated design gives you much faster re-heat times than can be achieved with plain tube coils

* Please note that Elnur Direct water cylinders do not come with a flex

The Elnur Gabarron unvented water cylinder range incorporates high flow rate controls, ideal for multi bathroom homes where baths fill very quickly.

These cylinders are a lightweight, easy to install answer for electric hot water options. The immersion heater(s) must be connected to the supply through a double pole linked isolating switch with a minimum breaking capacity of 13A. All tappings are within a 90° segment to make installation easier.

All models have a temperature and pressure relief valve factory set at 6 bar and 92-95°C. Although Elnur water cylinders are tested in the factory to a full 12 bar which is four times the normal working pressure.